Marble, granite and polished vitrified tiles bring a premium look to homes, hotels and offices, but they are not as stain-proof as they appear. Most natural stones are porous, and even dense surfaces can absorb tea, cooking oil, turmeric and water marks through micro-pores and grout lines. Once a stain penetrates, removing it is difficult and sometimes impossible. The smarter approach is to stop absorption in the first place with an impregnating protector such as FILA MP90 ECO XTREME.
What Is FILA MP90 ECO XTREME?
MP90 ECO XTREME is a water- and oil-repellent stain protector from FILA, the Italian surface care specialist. It penetrates the material instead of forming a film on top, reducing absorption while preserving the surface’s natural colour and finish. It is water-based, free of hydrocarbon solvents and has extremely low VOC content, backed by the Indoor Air Comfort GOLD certification. That makes it practical for occupied homes, kitchens and commercial interiors where strong solvent odours are unwelcome.
Which Surfaces Can It Protect?
- Polished, honed and brushed marble and granite
- Polished porcelain and vitrified tiles
- Natural stone, terrazzo, resin-marble and engineered stone
- Terracotta and coloured cement tiles
- Grout joints and crackle-glaze ceramics
It is widely used on floors, kitchen and vanity countertops, bathroom walls, staircases and reception areas.
Key Benefits
- Water and oil repellency: It resists everyday water- and oil-based stains, giving you time to wipe up spills.
- Natural look: It does not darken, yellow or leave a surface film. If you prefer a richer, enhanced tone on natural stone, choose FILA STONEPLUS
- Tolerates residual moisture: Being water-based, it can be applied 24 to 48 hours after the initial wash, which shortens project timelines.
- Ready to use: No dilution is needed. Simply shake and apply.
- Anti-graffiti benefit: Paint struggles to bond to treated surfaces, so graffiti is easier to remove from external stone.
The Right Sequence: Prepare, Clean, Then Protect
A protector seals in whatever is already on or within the surface, so the steps before it matter just as much.
- Before laying: Natural stone set on wet mortar beds can develop efflorescence, rust-coloured marks or tannin stains as salts rise from the substrate. Applying FILA PW10 to the back and sides of stone slabs before installation blocks these contaminants while letting the material breathe.
- After installation: Remove cement and grout residues. On acid-resistant surfaces such as porcelain, ceramic and terracotta, FILA DETERDEK PRO is an effective post-installation cleaner. Do not use acidic cleaners on polished marble and other calcareous stones, as they can etch the surface.
- Drying: Allow the surface to dry. MP90 ECO XTREME tolerates some residual humidity, but no standing water should remain.
How to Apply MP90 ECO XTREME
On matt and honed surfaces: Apply evenly with a brush or fleece pad, wetting the grout lines too. Wipe off any excess with a clean cloth before it dries. On highly absorbent materials, apply a second coat about 20 minutes after the first.
On polished surfaces: Apply generously, wetting the material and grout lines completely. Before it dries, usually within 10 to 15 minutes, rub the surface with a microfibre cloth dampened with the product to aid penetration and remove residue.
Always test on a small, inconspicuous area first to check the result.
Coverage per Litre
Coverage depends on how absorbent the material is. As a guide, one litre treats:
- Polished porcelain tiles: 30 to 50 m²
- Polished marble and granite: 20 to 30 m²
- Honed or matt stone: 10 to 20 m²
Aftercare and Long-Term Maintenance
Protection reduces absorption, but it does not make stone indestructible. Wipe spills promptly and clean regularly with a pH-neutral detergent rather than harsh acids or bleach. Remember that impregnating protectors do not prevent acid etching on marble from lemon juice, vinegar or some toilet cleaners.
Over years of foot traffic, polished marble, travertine and terrazzo floors gradually lose their gloss. FILA Ultra Shine is a professional crystallising treatment, applied with a single-disc machine, that restores sheen and improves resistance to wear on these surfaces.
Conclusion
FILA MP90 ECO XTREME offers eco-friendly, invisible protection that keeps marble, granite, polished tiles and grout looking their best for longer. Used as part of a complete care routine, from pre-installation treatment and cleaning to protection and maintenance, it helps safeguard your investment in premium surfaces. Explore FILA MP90 ECO XTREME at Crete Pro Trading or contact our team for advice on the right treatment for your stone or tiles.
Frequently Asked Questions
1. What is FILA MP90 ECO XTREME used for?
FILA MP90 ECO XTREME is a water-based, water- and oil-repellent stain protector for marble, granite, natural stone, polished porcelain tiles, terrazzo, terracotta, cement tiles and grout joints. It reduces absorption without changing the material’s natural look.
2. Does MP90 ECO XTREME change the colour or shine of marble?
No. It penetrates the material without forming a surface film, so it does not darken, yellow or alter the finish. For a deeper, enhanced colour on natural stone, an enhancing protector such as FILA STONEPLUS is the better choice.
3. How much area does one litre of MP90 ECO XTREME cover?
As a guide, one litre covers 30 to 50 m² of polished porcelain tiles, 20 to 30 m² of polished marble or granite, and 10 to 20 m² of honed or matt stone, depending on absorbency.
4. Can MP90 ECO XTREME be applied on a damp surface?
Because it is water-based, it tolerates residual humidity and can be applied 24 to 48 hours after the initial wash. The surface must still be clean, with no standing water or residues.
5. Does MP90 ECO XTREME protect marble from acid etching?
No. It protects against water- and oil-based stains but does not prevent etching caused by acids such as lemon juice, vinegar or some toilet cleaners. Wipe acidic spills immediately and clean with a pH-neutral detergent.
